Nel modulo RF-CONCRETE Surfaces, è possibile progettare superfici in calcestruzzo armato per solette, piastre e pareti secondo la ACI 318-19 o la norma CSA A23.3-19. Un approccio comune per la verifica solaio è l'uso di strisce di progetto per determinare le forze interne unidirezionali medie sulla larghezza della striscia. Questo metodo di striscia di progetto utilizza essenzialmente un elemento solaio bidirezionale e applica un approccio unidirezionale più semplice per determinare l'armatura necessaria lungo la lunghezza della striscia.
Using the RF-TIMBER CSA module, timber beam design is possible according to the CSA O86-14 standard. Accurately calculating timber member bending resistance and adjustment factors is important for safety considerations and design. The following article will verify the factored bending moment resistance in the RFEM add-on module RF-TIMBER CSA using step-by-step analytical equations as per the CSA O86-14 standard including the bending modification factors, factored bending moment resistance, and final design ratio.
In the AISC 360 – 14th Ed. C2.2, the direct analysis method requires initial imperfections to be taken into consideration. The important imperfection of recognition is column out-of-plumbness. According to C2.2a, the direct modeling of imperfections is one method to account for the effect of initial imperfections. However, in many situations, the expected displacements may not be known or easily predicted.